Need faucet repair in Oklahoma City? Our handyman crew fixes dripping faucets, running toilets, and fixture swaps at existing connections — and when a job needs a licensed plumber, we'll tell you up front and can point you to licensed plumbers we work with. Typical prices are below; send photos or call to get started.
Spout drips and handle leaks are usually a worn cartridge or washer. We diagnose at the fixture and tell you whether a repair or a full [faucet replacement](#price-plumb-faucet) costs less before we start.
Priced from photos
Like-for-like swaps at an existing location, including [kitchen-faucet replacement](#price-plumb-kitchen) when the shutoffs still work. Customer-supplied fixtures are fine when the connections match.
Flapper, fill valve, or a tank that won’t seat. See [running-toilet repair](#price-plumb-running) pricing when that is the fix.
New bowl and tank on an existing flange. We don’t move a toilet to a new drain location — that needs a plumber.
A rocking bowl usually means the wax ring or closet bolts. We reset the toilet on the existing flange when the floor and flange are sound.
Priced from photos
Swap a clogged or outdated showerhead at the arm. Valve-cartridge work inside the wall is a separate question — ask when you contact us.
Replace a failed disposal on an existing sink setup when the wiring and drain fit a standard unit. See [garbage-disposal replacement](#price-plumb-disposal) pricing.
Hook up a washer or install a dishwasher at existing supply and drain lines. New rough-in or relocating the box is outside this service. See [washer hookup](#price-plumb-washer) and [dishwasher installation](#price-plumb-dishwasher) ranges when the job matches those rows.
Priced from photos
Dripping faucets and running toilets start as cartridge, flapper, or fill-valve fixes. We repair or replace the fixture at the existing shutoff. Whole-house pressure loss, slab leaks, water heaters, sewer smell, or backups are referred out — when a job needs a licensed plumber, we'll tell you up front and can point you to licensed plumbers we work with.
| Situation | What we do | Typical cost |
|---|---|---|
| Drip from the spout | Cartridge or washer repair when parts are available; otherwise a new faucet at the same location. | $149–$249 |
| Leak under the sink | Supply-line or connection fix when we can operate the shutoffs without opening the wall. Drain or trap issues that need cutting pipe may be a plumber. | Priced from photos |
| Toilet keeps running | Flapper or fill-valve repair first. If the tank or bowl is cracked, we replace the toilet on the existing flange. | $125–$225 |
| Toilet rocks | Wax-ring reset and closet-bolt tighten-up when the flange is sound. | Priced from photos |
| No water, low pressure whole-house, slab leak, water heater, sewer smell or backup | Stop. That is licensed plumber territory — we will say so up front. | Licensed plumber |
When a job needs a licensed plumber, we'll tell you up front and can point you to licensed plumbers we work with — sewer mains, slab leaks, water heaters, gas lines, new rough-in, or opening walls to find a hidden leak. We stay on fixture-level work you can see.
Hard-water mineral buildup wears cartridges, aerators, and fill valves over time, which leads to drips and running toilets. In many older OKC homes the original shutoff valves under the sink or behind the toilet are stiff or seized — when we replace a faucet, those valves decide whether the job stays simple or needs a different plan.
Cartridge versus a new faucet, and whether the shutoffs still work, decide most of this visit.
Creative Hand Solutions is not a licensed plumbing contractor. We work on fixtures at existing connections; anything requiring a licensed plumber is referred out.
The $149 minimum service visit may apply to standalone appointments. Smaller tasks can often be bundled into one visit or package.
Prices shown are typical labor estimates for common projects in the Oklahoma City metro. Materials, specialty hardware, disposal, difficult access, high ceilings, concealed damage, unusual site conditions, permits, and work requiring a licensed trade may cost additional. Final pricing is confirmed after reviewing project details, photos, or site conditions.
Name the fixture, the city (Oklahoma City, Edmond, and the other core metro cities we serve), and whether water is still dripping. That is enough to start.
A shot of the faucet or toilet, plus under the sink or behind the bowl if you can reach it, helps us see supply lines and shutoffs. Photos are not an instant quote.
If it is a fit, we schedule. If it needs a licensed plumber, we say so before anyone drives over.
It depends on cartridge repair versus a full replacement and whether the shutoffs work. See the price table on this page for faucet replacement and kitchen-faucet ranges, and remember the $149 minimum visit may apply to small standalone jobs.
Yes. Most running toilets need a flapper or fill-valve repair. If the tank or bowl is cracked, we replace the toilet on the existing flange instead.
Yes, on an existing flange. Moving the toilet to a new drain location is plumber work.
Yes, when the connections match the existing supply lines. Bring the faucet and any instructions; we will confirm fit from your photos when we can.
If the cartridge is available and the body is sound, a repair is often enough. When parts cost close to a new faucet, we will say a replacement is the cleaner path before we start.
Yes — Edmond is one of the six core cities we serve.
Whole-house pressure loss, slab leaks, water heaters, gas lines, sewer smell, main-line backups, or moving a fixture to a new location. When a job needs a licensed plumber, we'll tell you up front and can point you to licensed plumbers we work with.
Yes, at an existing sink when the drain and power setup fit a standard replacement. Pricing is listed on this page.
Yes for faucet and toilet work at existing connections within this page’s scope. Multi-trade business premises lists are on commercial handyman services.
Sí. Se habla español. Puede llamar al (405) 957-4465 o enviar fotos por correo.
We do faucet and toilet work across Oklahoma City, Edmond, Moore, Yukon, Mustang, and Midwest City.
Oklahoma City, Edmond, Moore, Yukon, Mustang, Midwest City.
Call (405) 957-4465 or email ulises@creativehandsolutions.com with the city, what’s wrong, and a photo of the fixture when you can. We’ll review fit and next steps.